Feedback
Instructions for use of PPS
2023.09.26
Many people may only know the meaning, but don’t know much about the actual operation. There are two commands related to “PPS”: “PPSCONTROL” and “CLOCKOFFSET”. In today's article, ComNav will introduce these two commands to you and tell you how to use the PPS function.
Description of Common Commands
2023.09.07
Upon receiving any GNSS modules/GPS modules for the first time, it's natural to want to verify certain essential information. To assist you with SinoGNSS K8-series GNSS modules in this process, We've compiled a list of frequently used checking commands that we'd like to share with you today.
Command Introduction: “log sysconfig”
2023.08.29
In this article, we address clients' curiosity about the SinoGNSS K8 OEM board's configuration, introducing key information on system settings and command usage for checking and adjusting parameters
DP-filter Smooth Technology: Pass to Pass Solution for Agricultural Guidance Systems
2023.08.22
Enter ComNav Technology's DP-filter, a state-of-the-art smoothing filter algorithm that leverages carrier phase, delta-carrier phase, pseudorange, and Doppler observations. This article dives into the DP-filter's technical underpinnings, configuration, tested results, and its potential application scenarios.
'Interfacemode' Command: Optimizing K8 GNSS Module Configuration
2023.07.31
The issues users have with the 'interfacemode' command on the K8 GNSS module can be solved in this blog.We will provide a detailed explanation of these commands and their logical usage.
NMEA Message Introduction
2023.07.11
NMEA protocol is a standardized format for transmitting data between electronic devices in marine and navigation systems. NMEATalker provides functionality for parsing, generating, and processing NMEA sentences. The main purpose of NMEATalker is to simplify the handling of NMEA data within software or hardware systems. In this article, we will introduce how to change NMEATalker for ComNav K8 series GNSS module, and give an introduction of the supported NMEA messages.
Explanation Of Commonly Used Registration Options
2023.06.26
The GNSS module/receiver of ComNav has pre-installed firmware when it leaves the factory. If you have other needs during use, this registration instruction will help you use the module/receiver of ComNav smoothly.
CRU software instruction
2023.06.02
Thank you for choosing our Configuration Software - Compass Receiver Utility. This User Guide provides introduction of software installation, Toolbar, Project bar. It can help you to get familiarized with its interface and start your project effectively.
Contact Sales